PE-RT
PE-RT管材、管件是以-辛烯共聚物为主要原料,按照CJ/T175-2002生产的耐高温管道系统。它所用原料具有独特的分子结构,它以线性乙烯为主链,加上可控分支,从而具有良好的耐水压性能。它的柔软性特别好,在施工时容易弯曲而且不会变形,耐低温冲击性突出,安全卫生,热熔连接,接口可靠,永不渗漏,是地板采暖的理想管材。
◆ 重量轻:便于运输和安装
◆ Low weight: Convenient for transportation and installation
◆ 柔软性:弯曲模量为550MPa,有良好的柔软性。PE-RT管道施工时(特别在冬季),不需要特殊的工具或者加热就能弯曲,因此加工成本比较低,而且弯曲产生的内应力比较低,对管材的使用寿命影响小。同时因为管材柔软,容易固定,对固定管材的铁丝网的要求比较低,可以节约成本。
◆ Flexibility: Its flexural modulus is 550 MPa, with excellent flexibility. In PE-RT pipe construction (especially in winter), it can be bent without special tools or heating, thus processing cost is relatively low, and the internal stress produced by bending is low as well, producing little influence on service life of the pipe. Besides, as the pipe is flexible and can be fixed easily, with low requirements on wire net for fixing, thus it is able to reduce cost.
◆ 导热性:导热系数为0.40W/m•K,导热性能优异,适合用做地板采暖管。
◆ Heat conductivity: It has excellent heat conductivity, with heat conductivity coefficient of 0.40 W/m•K, so it is suitable for floor heating pipe.
耐低温冲击性:在低温下仍可保持高弹性。冬季施工时管材不易受到冲击而破裂,增加了施工安排的灵活性。
Low temperature impact resistance: It keeps high elasticity even under low temperature. During winter construction, the pipe is unlikely to be impacted to fracture, thus increasing flexibility for construction arrangement.
◆ 环保性:可以回收利用,不污染环境。
◆ Environmental protection performance: It can be recycled, thus it will not pollute the environment.
◆ 加工性能稳定:不存在控制交联均匀度等问题,简单的加工工艺使产品具有稳定的性能。
◆ Stable processability: It is free of problems like control of crosslinking uniformity, and its simple processing technology enables products to have stable performance.
◆ 长久使用寿命:具有良好的环境适应性,耐化学腐蚀性好,管道正常使用寿命在50年以上。
◆ Long service life: It has good environment adaptability and chemical resistance, thus the normal service life is above 50 years.
◆ 可靠的连接方式:可以热熔连接,从而形成完全封闭的防渗系统,连接方便牢固。
◆ Reliable connection: Hot melting connection can be adopted, which is easy and firm, to form a completely sealed anti-seepage system.
◆ 卫生性能:无毒、无味、卫生性能好。
◆ 地板采暖系统
◆ 建筑物内冷热水管道系统
◆ 工业厂房给水管系统
◆ 热回收系统
◆ 中央空调系统
公称外径dn (mm) Nominal outside diameter, dn (mm) |
公称壁厚en(mm) Nominal wall thickness, en (mm) |
|||
S2.5 |
S3.2 |
S4 |
S5 |
|
16
|
2.7
|
2.2
|
2.0
|
1.8
|
20
|
3.4
|
2.8
|
2.3
|
2.0
|
25
|
4.2
|
3.5
|
2.8
|
2.3
|
32
|
5.4
|
4.4
|
3.6
|
2.9
|
90度弯头 90° elbow |
管帽 Pipe cap |
管箍 Pipe clamp |
正三通 Equal tee |
等径三通 Equal tee |
异径三通 Reducer tee |
90度弯头 90° elbow |
法兰 Flange |
过滤器 Filter |
球阀 Ball valve |
过滤器球阀 Filter ball valve |
Locking valve |
闸阀 Gate valve |
Pure copper double ball valve water manifold |
Nickel plated forged and pressed copper water manifold |
铜镀镍加长双球阀分集水器 Nickel plated extended double ball valve water manifold |