Cylindrical irrigation drip

Detail
Features
Field
Specifications
Pipe fittings

- Commodity name: Cylindrical irrigation drip
Changhong drip irrigation is an irrigation method that evenly and slowly drops water and nutrients needed by crops into the soil in the root zone of crops through a low-pressure pipeline system and an irrigator installed on the capillary. Drip irrigation does not damage the soil structure, soil internal water, fertilizer, gas, heat often maintain a good condition suitable for crop growth, evaporation loss is small, does not produce surface runoff, almost no deep leakage, is a water-saving irrigation method. The main feature of drip irrigation is that the amount of irrigation is small, and the flow rate of the irrigator is 2-12 liters per hour. Therefore, the duration of one irrigation is longer, the irrigation cycle is short, and the irrigation with small water can be achieved. The required working pressure is low, the irrigation amount can be controlled more accurately, and ineffective inter-plant evaporation can be reduced, and water waste will not be caused. Drip irrigation can also be managed automatically. Changhong water saving design The drip irrigation system is mainly composed of three parts: head hub, pipeline and drip head. The following is the schematic diagram of the drip irrigation system. 1. Head hub: including water pump (and engine), fertilizer tank, filter, control and measuring instrument. Its role is to pump, fertilize, filter, and send a certain amount of water into the main pipe at a certain pressure. 2. Pipeline: including main pipe, branch pipe, capillary pipe and necessary adjustment equipment (such as pressure gauge, gate valve, flow regulator, etc.). Its function is to evenly transport pressurized water to the dropper. 3. Drip head: Its role is to make water flow through small holes, forming energy loss, reducing its pressure, so that it drops into the soil in the way of drops. The dropper is usually placed on the soil surface, but can also be shallow buried for protection.

Changhong drip irrigation is an irrigation method that evenly and slowly drops water and nutrients needed by crops into the soil in the root zone of crops through a low-pressure pipeline system and an irrigator installed on the capillary. Drip irrigation does not damage the soil structure, soil internal water, fertilizer, gas, heat often maintain a good condition suitable for crop growth, evaporation loss is small, does not produce surface runoff, almost no deep leakage, is a water-saving irrigation method. The main feature of drip irrigation is that the amount of irrigation is small, and the flow rate of the irrigator is 2-12 liters per hour. Therefore, the duration of one irrigation is longer, the irrigation cycle is short, and the irrigation with small water can be achieved. The required working pressure is low, the irrigation amount can be controlled more accurately, and ineffective inter-plant evaporation can be reduced, and water waste will not be caused. Drip irrigation can also be managed automatically.

Changhong water saving design
The drip irrigation system is mainly composed of three parts: head hub, pipeline and drip head. The following is the schematic diagram of the drip irrigation system.
1. Head hub: including water pump (and engine), fertilizer tank, filter, control and measuring instrument. Its role is to pump, fertilize, filter, and send a certain amount of water into the main pipe at a certain pressure.
2. Pipeline: including main pipe, branch pipe, capillary pipe and necessary adjustment equipment (such as pressure gauge, gate valve, flow regulator, etc.). Its function is to evenly transport pressurized water to the dropper.
3. Drip head: Its role is to make water flow through small holes, forming energy loss, reducing its pressure, so that it drops into the soil in the way of drops. The dropper is usually placed on the soil surface, but can also be shallow buried for protection.
1. The drip irrigation belt inlaid with flat dripper is an integrated drip irrigation belt with flat shaped dripper inlaid on the inner wall of the pipe belt.
2, widely used in greenhouses, field cash crop irrigation.
3, drip head and pipe belt integration, easy to install and use, low cost, less investment.
4, the drip head has a self-filtering window, good anti-blocking performance.
5, the labyrinth flow channel, with a certain pressure compensation effect.
6, the dropper spacing can be determined according to user requirements.
无

1, pipe diameter: ￠12mm, 16mm, 20mm
2, wall thickness: 0.2-0.6mm
3. Working pressure: 0.02-0.25MPa
4, flow: 2-3 l/h

Pipe diameter（mm）	16
Wall thickness（mm）	0.2	0.3	0.4	0.6
Flow rate（l/h）	2.9	2.7	2.6	2.5
Maximum working pressure（MPa）	0.1	0.15	0.2	0.25

Patch-type drip irrigation belt

None

AMDIN | Message | Contact

Business License